Pasar al contenido principal

Copper concentrate analysis by pressed powder method

AppNote XRF1041: copper concentrate by pressed powder method

Background

This application note will show the conventional calibration method of copper ore concentrate analysis and also standardless analysis using the fundamental parameter method. Copper is one of the essential base metals in modern infrastructure. It is used for construction, electronics, machinery, automobile and marine vessel etc. in the form of electric cable and copper alloys. Copper ore mined as mainly sulfide ore is usually shipped as concentrate of 20 – 40% in copper content after processing at the plant near mine site.

Copper concentrate contains a variety of impurities that are either valuable elements as byproducts, or harmful to quality in copper metal products and hazardous to the environment and human health. In modern copper deposits, ore grade of copper is decreasing while impurities in ore tend to increase. Therefore, the demand for rapid and accurate determination of various metals of major and trace amounts in copper ore and concentrate is increasing. X-ray fluorescence spectrometry is the best method for the analytical requirements of routine analysis to monitor ore grade with high precision, accuracy and rapidity.

WDXRF Products from Rigaku

El espectrómetro secuencial WDXRF con tubo inferior de sobremesa, analiza de O a U en sólidos, líquidos y polvos.

Espectrómetro secuencial WDXRF de alta potencia, de tubo superior con nuevo software de sistema experto Guidance (Guía) ZSX.

High-power, tube-below, sequential WDXRF spectrometer with new ZSX Guidance expert system software

Espectrómetro WDXRF diseñado para manejar muestras muy grandes y/o pesadas.

Espectrómetro WDXRF de alto rendimiento, multicanal, simultaneo, de tubo superior, analiza de Be a U

Analizador WDXRF de azufre ultra bajo para el método ASTM D2622.

Analizador WDXRF de azufre ultra bajo para el método ASTM D2622.