Skip to main content

Quantitative analysis of aluminum alloy

AppNote XRF1055: quantitative analysis of aluminum alloy

Background

This application note demonstrates the excellent performance of Supermini200 in aluminum alloy analysis. Aluminum alloy, which has the valuable properties of being both “light” and “strong”, is used in many industries such as automobile and aircraft. Since aluminum alloy has a broad range of grades whose characteristics are strongly dependent on the elemental compositions, it is very important to control the components. X-ray fluorescence (XRF) analysis quickly and easily offers precise elemental analysis results to make control of the components in aluminum alloy possible.

Measurements were performed on the Supermini200 for Mg, Si, Ti, Cr, Mn, Fe, Ni, Cu, Zn, Sn and Pb. For the measurement of Sn, a zirconium filter was used to reduce the background to improve the peak to background ratio. The calibration curves were generated using ALCOA spectrochemical standards KA332, KB413, KB514, KC413, SS332, SS380, SS384, SS413 and SS513. Matrix correction was applied to all calibration curves. The correction coefficients were calculated theoretically by the fundamental parameter (FP) method.

リガクのWDXRF製品

走査型蛍光X線分析装置 ZSX Primus III NEXT

「ZSX PrimusIII+」の後継製品。スループット、防塵性を向上。

波長分散小型蛍光X線分析装置 Supermini200

高出力200Wで広範囲なアプリケーションに対応

走査型蛍光X線分析装置 ZSX Primus IV

(Be)から(Cm)までの主要元素および微量元素の迅速な定量。

走査型蛍光X線分析装置 ZSX Primus IVi

下面照射方式の走査型蛍光X線分析装置

多元素同時蛍光X線分析装置 Simultix 15

高精度分析が可能な多元素同時型の蛍光X線分析装置。

走査型蛍光X線分析装置 ZSX Primus 400

大径試料(φ400mm×50mm)をそのまま、多試料にも対応。

蛍光X線硫黄分分析計 Micro-Z ULS

ディーゼル、ガソリン、その他超低レベル硫黄分析用に設計。

波長分散型蛍光X線塩素分分析計
Micro-Z CL

石油製品中の塩素の高感度分析ができる卓上波長分散型蛍光X線分析装置

各種金属めっきやコーティング皮膜の付着量 ・厚みを計測することができます。

懸濁液も測定可能なオーバーフロー型容器を搭載した、蛍光X線方式による液中の元素濃度を計測できるシステムです。