Vacuum
 
 
Vacuum
Products
 

Magnetic fluid (ferrofluid) fills a small annular gap between a rotating shaft and a stationary magnetic pole piece. The gap is part of a high-energy magnetic circuit which includes the shaft and pole piece. The very large magnetic flux in the gap exerts a force on the fluid, holding it in place against pressure difference from atmosphere to vacuum, yielding a dynamic rotary seal in which there is no solid friction. Therefore, very long operating lifetimes are achieved.

Because the magnetic fluid has very low vapor pressure, it remains permanently in place for the entire lifetime of the seal, and does not contaminate the system. Some applications have special requirements (high temperature, highly reactive gases) which can be satisfied by selection of the optimum fluid from our family of fluid materials.

 
Home > Products > Vacuum products
 
Request information
Printer-friendly

Product in the spotlight

SuperSeals SuperSeals
Researchers at Rigaku have found a way to simplify and further improve the design of fluid sealed feedthroughs.

>> More information

 

 

Rigaku vacuum products

Magnaseal rotary feedthroughs provide long life and maintenance-free operation in high vacuum systems and other critical process applications. Rigaku's leadership in feedthrough technology is widely recognized.

Rigaku Vacuum Products
7a Raymond Avenue, Suite 4
Salem, NH, 03079
email: info@rigaku.com
Tel: (603) 890-6001
FAX: (603) 890-6016

MagnaSeal features

  • No magnetic field in the vacuum: The closed and balanced Magnaseal magnetic circuit produces less than 10 Gauss as compared to >180 Gauss for competitive product. This allows the feedthrough to be located close to magnetic-field-sensitive processes without effect on process.
  • High-pressure capacity: 2.5 atmospheres minimum, producing very long life seals. The Magnaseal will continue to seal even if the bearings fail (100% eccentric condition)! The Magnaseal will tolerate high shaft side loads that will cause competitive units to fail.
  • High-strength shaft: Three times the torque-transmission capacity of competitive products. Very resistant to shaft breakage or to seal failure due to excessive torque or side loads.
  • Seal stages in stator: Shaft diameter is not reduced by seal stages cut in shaft as in competitive product. The seal stages cut into the shaft in competitive product can reduce the effective shaft diameter .08".
  • High external magnetic field tolerance: The closed, balanced, high-energy magnetic circuit of the Rigaku Magnaseal will operate reliably in >500 Gauss external magnetic fields without seal degradation versus less than 100 Gauss for competitive product.
  • More rugged construction: The compact size of the Rigaku Magnaseal seal element allows larger bearings to be installed than typical competitive product resulting in longer life for the end user.

Vacuum Products application notes

»» Learn more about Rigaku vacuum products

Click here to make this your Rigaku home page.