Skip to main content

High-resolution X-ray rocking curve analysis of an SiGe film grown on an Si (001) substrate

Background

High-resolution X-ray rocking curves can be used to analyze the thickness, composition, and strain state of epitaxial single crystal films. Much of this information can be obtained by simulating and/or fitting the measured rocking curve using X-ray dynamical diffraction theory.

Investigation

In Figure 1, an SiGe film epitaxially grown on top of an Si (001) substrate along with an Si cap layer by molecular beam epitaxy (MBE) was analyzed. The nominal thickness and Ge concentration of the SiGe layer are 50 nm and 20.0%, respectively. The nominal cap layer thickness is 20 nm.

SiGe film epitaxially grown on top of an Si (001) substrate along with an Si cap layer

The experimental rocking curve (red) was measured on the SmartLab multipurpose diffractometer with a Ge(440)x4 monochromator. The blue curve is the fitting result using Rigaku's rocking curve analysis software. The fit is in excellent agreement with the measured data. From the fitting, we learn that the SiGe layer is actually 49.24 nm with a Ge concentration of 13.7%. The Si cap layer thickness is 24.25 nm, slightly higher than the nominal value.