Popular products by category
Rigaku nano3DX is a true X-ray microscope (XRM) with ultra-wide field of view, 25X larger volume than comparable systems, and three X-ray wavelengths for different matrices.Read more...
HyPix-3000 is a next-generation two-dimensional hybrid pixel array semiconductor detector designed specifically to meet the needs of the home lab diffractionist.Read more...
Analytical solutions by industry
New papers of interest
Special Feature: Pharmaceutical Analysis (5): Analysis of trace impurities in pharmaceutical products using polarized EDXRF spectrometer NEX CG.Read more...
Wafer surface contamination metrology with TXRF/VPD
Ultra-trace measurement of elemental surface contamination
TXRF analysis can gauge contamination in all fab processes, including cleaning, litho, etch, ashing, films, etc. The TXRF-V310 can measure elements from Na through U with a single-target, 3-beam X-ray system and a solid-state detector system.
The TXRF-V310 includes Rigaku's patented XYθ sample stage system, an in-vacuum wafer robotic transfer system, and new user-friendly windows software. All of these contribute to higher throughput, higher accuracy and precision, and easy routine operation.
Integrated VPD capability enables automatic VPD preparation of one wafer while a TXRF measurement is made on another wafer for the highest sensitivity and high throughput. VPD-TXRF eliminates the operator variability that may occur with ICP-MS, and VPD-TXRF can be completely controlled via factory automation. VPD recovery from selected areas, including the bevel area, is available.
Optional Sweeping TXRF software enables mapping of the contaminant distribution over the wafer surface to identify "hot spots" that can be automatically re-measured at higher precision.
Optional ZEE-TXRF capability overcomes the historical 15mm edge exclusion of original TXRF designs, enabling measurements to be made with zero edge exclusion.
Optional BAC-TXRF capability enables fully-automated front-side and back-side TXRF measurements of 300mm wafers with non-contacting wafer flipping.
- Accepts 300 mm, 200 mm, and 150 mm wafers
- Wide range of analytical elements (Na~U)
- Light-element sensitivity (for Na, Mg, and Al)
- Single target 3-beam method and XYθ stage are unique to Rigaku, enabling highly accurate ultra trace analysis over the entire wafer surface
- Integrated, fully-automated VPD preparation for highest sensitivity
- 1E7 atoms/cm² detection limits
- Import measurement coordinates from defect inspection tools for follow-up analysis
- Multitasking: simultaneous VPD and TXRF operation for highest throughput
- Size of wafer: 300 mm, 200 mm, and 150 mm
- Rotating-anode X-ray source
- Sample stage: XY θ stage
- Solid-state detector
- Oil-free electrical transformer
- Three-beam excitation
- Automatic optics alignment
- Data import from external surface defect inspection tool
- Integrated VPD capability
- GEM-300 automation software for full factory automation
- SP-TXRF capability enables mapping of the entire wafer surface
- ZEE-TXRF capability enables measurements to zero edge exclusion
- BAC-TXRF capability enables fully-automated front-side and back-side measurements
- Wafer bevel VPD capability
- Dual VPD scanning solutions
- Inserts for VPD droplet collection in vials
- VPD-integrated TXRF for trace element analysis of Na~U
- Applicable as an in-line contamination monitor
- Detection of transition metals at the 10⁷ atoms/cm² level is possible (500 sec measurement)
- Determination of the contaminant element spatial distribution (wafer mapping)
- Contamination on a 300 mm wafer surface measured in 45 min
- Contamination distribution is seen at a glance by individual element maps and overlapping element views
- Average contamination is calculated over the entire wafer surface
- High-precision measurements can be carried out automatically on contaminated spots found by whole-wafer surface screening
- For routine analysis on particular points: Direct-TXRF of designated coordinates
- Correct contamination levels are reported at all points on a wafer by avoiding diffraction interference
- Detection of transition metals at the 10⁹ atoms/ cm² level is possible (500 sec measurement)
- Using a high-power rotating-anode X-ray source, three-times higher throughput is achieved compared with a sealed-tube source
- Light elements, transition metals, and heavy elements are measured seamlessly without switching between multiple X-ray tubes
Fully-automated, high-sensitivity analysis in fab
- 10⁸ atoms/cm² level of Ca analysis in the cleaning process
- 10¹⁰ atoms/cm² level of Na and Al analysis in the cleaning process
- 10⁸ atoms/cm² level of transition metal analysis in the diffusion process
- 10⁸ atoms/cm² level of Ni contamination analysis in post-cleaning of oxidization
Entire surface mapping of 300mm wafer with high throughput
- Entire surface mapping in LPCVD (10¹⁰ atoms/cm² level)
- Entire surface mapping of contamination in ion implantation
- Entire mapping in RIE process (10¹⁰ atoms/cm² level)
- Entire mapping in transferred wafer of manufacturing tool (10¹⁰ atoms/cm²)