nano3DX

How do I achieve high resolution?

Rigaku nano3DX uses parallel beam geometry. This geometry uses an optical lens to magnify the sample image. It does not use the X-ray beam divergence and eliminates blurring caused by the X-ray focus size and drift. With the 20X magnification lens, you can achieve 325 nm voxel resolution and true submicron (700 nm) spatial resolution.

At this resolution, you can see individual carbon fibers (~7.5 um), the intricate structures of seeds, small insects, etc.

How do I change X-ray anodes?

Rigaku nano3DX is equipped with a dual-wavelength rotating anode X-ray generator, MicroMax-007 HF. The rotating X-ray anode is made of Cu, providing Cu characteristic radiation of 8 keV. Another anode material, Cr 5.4 keV, Mo 17 keV, or W for Bremsstrahlung radiation, can be added to the Cu anode to provide the second radiation. You can switch between two radiations with a simple click on the instrument control software.

You can image an even 5% density difference in organic materials by using optimized radiation and differentiate amorphous and crystalline phases, high- and low-density polyethylene, etc.

Do I need to prepare my sample in a special way?

No, X-ray CT measurements require minimum to no sample preparation. As far as the sample size is close to the FOV (field of view), you can mount the sample on the sample stage with a small pin as is, and you are ready to run a CT scan.

Because X-ray CT experiments are done in the air and do not require conductivity on the sample as is the case for SEM (scanning electron microscopy), organic samples such as plants can be measured without a drying or coating process.

Compare all CT products.